1 - Glue the baby onto the center of the styrofoam disc and let it dry.

2 - Put glue on the outer edge of the styrofoam disc and complete step number 3 before the glue dries.

3 - Take one of the domes and push it over the styrofoam disc, that you just put glue on the edge,
     so the bottom of the disc and the bottom edge of the dome are even.

4 - Glue the lace around the dome  toward the bottom of the dome.

5 - Glue the pearls on the seam of the lace you just glued to the dome.

6 - This lace is glued from one side and over the dome to the other side. Then glue pearls on top of the lace.

7 - Tie the plain or printed ribbon into a bow and glue it on top of the dome.

8 - Glue the baby shower sign, or anything else that you would wish to glue on, onto the center of the bow.

Click to go back